Italiano English      Flickr LinkedIn YouTube RSS

Compact-S-UART

802.11 b/g/n Wi-Fi OEMs Module, Tx-Rx, Server Type, 2 Pin DIG I/O, Pin Reset

Ordering Code: CMP-R-S01-S

The Compact-S-UART is plug-and-play stackable Wi-Fi module. It is a serial Uart to Wi-Fi Converter.

The Compact-S-UART is server type Wi-Fi module. It is characterized by the capability to create a Wi-Fi network with its own IP factory editable and allow other Wi-Fi devices to connect to it.

Just a few configuration steps a quick and easy process, using our SW-Configurator issued free of charge to transfer and receive signals from the UART port of the host device and the wireless network TCP/IP.

Compact-S-UART is a module of very small dimension (42 x 23 x 5 mm), characterized by a very low power on which a TCP / IP module, a micro processor and an antenna are incorporated.

Thanks to its compact size and extremely low power consumption, it is perfect for mobile applications such as wireless activity monitoring, sensors and portable devices battery. With modules Compact-S-UART implements the concept of Internet-of-Things.

INTERFACES

Compact-S-UART makes easy the connection to a machine with an UART (RS232 without transceiver) interface, directly to a Wi-Fi network. Compact-S-UART is also equipped with two digital I/O pins, that are configurables as digital Input or Output.

NO SOFTWARE NEEDED

The Compact-S-UART modules are immediately ready to be used.

Thanks to Wiicom configurator software (Compact Ready Go), available on wiicom website, user can define all Wi-Fi network settings.

There’s no need to develope or modify any software on the host board.

EVALUATION BOARD

Wiicom offers to the evaluator a PWR-F-RS232 board, which together with your Compact-S-UART in a few minutes, industrial devices will connect on Wi-Fi, eliminating time hardware and software development.

Data Interface Direct transmission up to 2.5 Mbps (without overhead) RF Frequency Band 2.412 - 2.484 GHz (integrated antenna)
Electrical Compatibility  TTL Compatible 3.3V / 5V
WLAN Functions Ad-hoc and infrastructure modes Security Protocol WEP, WPA and WPA2-PSK
Network Standard Support IEEE 802.11b/g single stream n Network Protocols TCP, IPv4, ARP, ICMP
RF Output Power 15-17 dBm Operating Temperature -40 to + 85 °C
RF Data Rates 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps Supply Voltage 4 - 10 Vdc (typical 5V)
Dimensions 42 x 23 x 5 mm Consumption RX = 56mA, TX = 130mA  (@4V)

  • Compliant to 802.11b/g and single stream 802.11n
  • Host interface through USDB®
  • Ad-hoc and infrastructure operation modes support
  • WPA/WPA2-PSK and WEP security modes support
  • TCP protocol support
  • Power-saving management
  • 7 configurable server type sockets

Through simple accessories it's possible to evaluate the features and performance of all modules WIICOM Family Compact, linking them to various interfaces on board electrical devices for industrial use, handling analog signals, digital signals and the most common data bus.
Electrical Interface RS232 0-5V / 0-10V / 6-28V (with accessories) / 0-20mA / 4-20mA (with accessories)
Data Protocol MODBUS
Connectivity Wi-Fi is ready after few configuration steps using an intuitive PC-interface (available for Windows and Linux OS). The accessories currently available matching family of Compact modules are the following:
adapter-holes

Strip Adapter 8-pin

The Strip Adapter 8-pin module is used to immediately connect the Compact-Family modules to customer's device. Strip 8-pin Vertical, 8-pin Horizontal and 8-pin with holes are available.
basetta232

PWR-F-RS232

The PWR-F-RS232 board is used to transform the Compact-UART into an RS232 compatible Device.

brief_A4_compactS

screen-dashboardcar_tabletThe Drag&Drop Dashboard (read more ...) is available bundled software to implement a customizable dashboard. Available widgets are typical environmental and automotive gauges and can be positioned into the dashboard in a drag&drop way. Drag&Drop Dashboard is able to visualize a set of signals with custom widgets directly chosen by the user. With Drag&Drop Dashboard, OEMs and System Integrators will be able to create your own custom application that fits perfectly to create prototypes for the monitoring of their devices. Drag&Drop Dashboard is available on PC version and on mobile (iOS and Android) version.